2pc. External Mount 9V Battery Trays - Choose Tray Style

These external-mount 9-volt battery trays are perfect for custom amplifiers, cigar box guitars with pre-amps or active circuits, and other electronics usage! Trays such as this make it possible to change batteries without opening up the enclosure, which most end-users highly prefer.

We offer two varieties: "Style 1" has a slide-out tray in which the battery lies flat, and makes contact with metal solder lugs when the tray is inserted. Wires to your circuit are soldered directly to the solder lugs. "Style 2" features a hinged lid a cavity in which the battery sits vertically on its side, which is good for cases where you don't have a lot of depth available in the enclosure. Style 2 also has a wired battery clip as opposed to solder lugs, the red and black leads of which would need to be connected into your circuit.

Style 1 Specs: The overall depth (or height, as shown in the main listing photo) is 2 1/4". A hole approximately 1" x 1 3/8" is required to allow the tray to be inserted. The outer visible face of the tray is 2 1/8" at its widest point, and 1 1/8" across. Black Phillips-head screws are Included.

Style 2 Specs: The outside footprint (the part visible when mounted) is 3 3/16" long by 1 1/8" wide. The depth beneath the mounting flange is 1 1/8". A hole slightly bigger than 7/8" x 2 3/8" would need to be cut in the panel you want to mount it in. 

Please note that any battery shown in the listing photo is for illustrative purposes only and is not included with this product.