2pc. Mini Humbucker Conversion Mounting Rings - Choose from 4 Wood Types!

Convert your electric guitar with standard full-size humbuckers to MINI humbuckers with these conversion mounting plates!

This is a set of two laser-cut pickup rings sized specifically for the popular mini humbucker style of pickup (such as our Snake Oil pickups), but with one difference from our regular rings: the outer dimensions of these are sized for full-size pickups, so you can use these to convert a guitar from full-sized humbuckers to mini humbuckers!

We cut these from 1/8" thick solid hardwood panels, and the result is a beautiful, Made-in-the-USA way to add a touch of class to your mini humbucker installs. No more do you have to worry about getting the opening hole exactly right and the edges perfect... just cut/route your hole (our acrylic pickup opening template works great for this), install the pickup and then snug one of these down over it.

We offer these in 4 different hardwoods - just choose your favorite from the options above. The photo will change for each to show you an example of what what particular wood looks like. These pickup rings include holes for the machine screws that come with most mini humbuckers, which allow you to adjust the height of the pickup relative to the strings.

The outer dimensions of these rings is 3.75" wide by 2.125", with a thickness of 1/8". The opening is 2.69" by 1.11", which fits very nicely over the Snake Oil Mini Humbucker pickups we sell - if you got your pickup somewhere else, be sure to measure it carefully to make sure it will fit! These rings have four holes for mounting, but we do not include screws. You can use either round-head screws or flat-head screws (careful countersinking recommended if you want to use flat-head screws, to keep from splitting the thin wood). We ship these in the bare/natural wood state... applying a bit of linseed oil or other finish can really bring out the wood tones.

Because this is thin wood, be very careful when handling and mounting not to bend or twist the pieces, and to not put them under too much pressure from a screw head. Wood this thin can split easily and must be handled with care! Because these parts are cut by a laser, the edges will have some darkening. You can sand this off if desired, but it really isn't necessary.