Chrome Classical Guitar-style (3-on-a-plate) 3L/3R Tuners/Machine Heads - Choose Shaft Style

These are 2-piece sets of classical-style (3-on-a-plate) guitar tuners in 3 left/3 right configuration. These were designed to be used in the classical-guitar style where a slot is cut in the headstock and the tuner shaft inserted from the side, though the end-hole version can also be installed through from back to front in the standard way.

We offer two varieties of these:

• The "Center Hole" version has the string holes are about halfway down the tuner shafts and will not be accessible if mounted from the back of a standard headstock. Be sure you need center-hole shaft tuners before buying these! There is no recessed string divot at the hole on this style.
  
• The "End Hole" version have the string holes at the end of the shaft, in the standard style for guitar tuners. There is a recessed string divot at the hole on this style.
  

Each set includes mounting screws (4 per side). Please note that this style of tuner does not traditionally make use of bushings, so if you want to use bushings be sure to order them separately.

Size Specs:

• Plate Length: 4 1/2" (11.5cm)
• Distance Between Posts (center to center): 1 3/8" (35mm)
• Plate Width: 21/32" (16mm)
• Post Length: 1 1/8" (28mm)
• Post Diameter: 1/4" (6mm)
• CENTER-HOLE: Post Base to String Hole: 1/2" (12.5mm)
• CENTER-HOLE: Post Top to String Hole: 1/2" (12.5mm)
• END-HOLE: Post Base to String Hole: 13/16" (20mm)