Classic-Style Box Corners - Choose Finish Color & Pack Size

These classic-style box corners are a beautiful addition to any cigar box guitar or other woodworking box project. Available in four different plated finishes and three pack size options, with matching screws included. These corners have a straight back/flange part, and make great accent pieces on any other project where you want to dress up (and protect) a corner.

These corners are 1 1/4" long on each leg and have a depth of about 1/2". Two screws are used per corner per mounting. Note that there is a little bit of a radius (curvature) to the inside point of the corner; if you are mounting these on a box that has sharp points on its corners, you may need to file a little of those shart points off to get these to fit snugly.

PLEASE NOTE: These corners have a "distressed" style of finish, as can be seen in the close-up listing photos. That means that the surface of the plating may have light scuffs, scratches and other marks. We feel it still looks fine and will work fine on most projects, especially homemade/handmade instruments. To some degree these could likely be buffed out, but these should not be used if your project requires a perfect unblemished surface.