Description
This is a pack of 10 individual 20-inch (50.8cm) lengths of shielded wire, perfect for use in cigar box guitar electronics. This is a "2-conductor" wire, with a single insulated wire for the positive, and a braided bare wire for the shielding/ground. The ends are pre-stripped for easy use. Just strip the white insulated wire and solder it to the positive contact point on your component, and then twist the uninsulated wires together and solder that to your ground.
Related Products
10pc. Assortment of Smaller Cigar Boxes - Free shipping in the US!
$39.99
This is a random lot of 10 (ten) smaller cigar boxes, great for ukuleles, one-string diddley bows, amplifiers, purses, clocks and other such projects. We get quite a few of these when buying big...
10pc. Mini Diamond File Set - Great for Instrument Building!
C. B. Gitty
$8.99
This is a set of 10 mini diamond files, each 5.5 inches long and in a range of profiles (flat, half-round, quarter-round, triangle, round/rat tail, etc). These are perfect for notching nuts and...
41mm Jumbo Piezo Disks with 4-inch Pre-wired Leads - Choose Pack Size
C. B. Gitty
$4.29 - $17.99
These jumbo-sized 41mm piezo elements feature 4-inch pre-wired with leads to save you having to solder the leads on yourself. These can be used in cigar box guitars, foot stompers and other home-made...
10pc. Hardwood Nut & Saddle Blanks for Cigar Box Guitars - Choose Wood Type
C. B. Gitty
$6.99
These are hardwood blanks that can be used as nuts or saddles, perfect for cigar box guitars and other homemade instruments. Here are the dimensions:
Length: 2" (50.8mm)
Height: 3/8" (0.375...
EconoHarness Pre-wired Cigar Box Guitar Wiring Circuits - Choose Harness Type
C. B. Gitty
$3.99 - $5.79
Well folks, if you've been looking at the absolute cheapest way to avoid soldering up your own pickup wiring circuits, here you go. These are the absolute rock-bottom economy-priced wiring harnesses...