Stainless Steel Pickup Cover Ring Pairs - Made in the USA - Choose Pickup Type

These are sets of two stainless steel pickup rings sized specifically for several of our most popular styles of pickup. These are cut from thin-gauge stainless steel sheet, and the result is a beautiful, Made-in-the-USA way to add a touch of class to your homemade instrument builds. No more do you have to worry about getting the opening hole exactly right and the edges perfect... just cut/route your hole (our acrylic pickup opening template works great for this), install the pickup and then snug one of these down over it. 

We currently offer these for our three most popular styles of pickups, with size information below. Please note that if you got your pickup somewhere else, you'll need to measure it carefully to make sure these will fit! Mounting screws are included with all options.

• Mini Humbuckers (Snake Oil): Outer dimensions are 3.68" wide by 1.74". The opening is 2.71" by 1.12". We include #2 x 1/4" silver Phillips-head screws for mounting. 
• Single-Coil (Telecaster-style): 4" wide by 1.5". The opening is 2.75" by 0.70", which fits very nicely over most standard Fender Tele & Strat-style single-coil pickups
• Soap Bar P-90: 4 3/8" wide by 2 7/16". The opening is 3 7/16" by 1 7/8".

These are cut from .030" stainless steel sheet and come with the natural sheet factory finish (may have slight discolorations/scuffs that can be buffed off if desired). Use fine-grit sandpaper for a matte finish, or polish up to a mirror shine if you so choose.