Description
This is a set of two (2) paper-cone audio speakers, rated at 3 watts and 8 ohm resistance. While not full range, these are good inexpensive workhorse speakers for various audio projects, including cigar box amplifiers. Their low profile (just over 1 inch in depth) makes then good for flatter applications. They come with standard 1/8-inch blade-style solder lugs for easy wiring, and the magnet/area is shielded. See full specs below.
Ask about bulk discounts!
Key Features
- Lightweight paper cone for added efficiency
- Neodymium magnet for reduced weight
- Simple flat frame for easy mounting
Product Specifications
- Nominal Diameter: 3-1/2"
- Bolt Circle Diameter: 3.9375
- Power Handling (RMS): 1 Watts
- Power Handling (MAX): 2 Watts
- Impedance: 8Ω
- Frequency Response: 200 to 9,000Hz
- Sensitivity: 83.36dB 2.83V/1m
- Voice Coil Diameter: 0.5"
Materials of Construction
- Cone Material: Paper
- Surround Material: Paper
- Voice Coil Wire Material: Copper
- Voice Coil Former: Paper
- Basket / Frame Material: Steel
- Magnet Material: Neodymium
Mounting Information
- Overall Outside Diameter: 3.5"
- Baffle Cutout Diameter: 3.375"
- Depth: 1.25"
- # Mounting Holes: 4
Related Products
2pc. 3-inch 5-watt Full-Range Amp Speakers
C. B. Gitty
$12.49
This is a set of two (2) 3-inch, 5-watt full-range amp speakers, perfect for use in homemade amplifier building - the same ones we include in our amp kits and use in most of the amplifiers we build...
1pc. 4.5-inch 15-watt Full-Range 8-ohm Amplifier Speaker
C. B. Gitty
$6.99
This 4 1/2-inch speaker boasts a full & rich frequency range, perfect for homemade guitar amplifiers and other audio uses such as powered speakers. We have a limited number of these and can't get...
1pc. 5 x 7-inch 10-watt Full-Range 6-ohm Amplifier Screened Speaker
C. B. Gitty
$10.99
This oval-shaped 5 x 7-inch speaker boasts a full & rich frequency range, perfect for homemade guitar amplifiers and other audio uses such as powered speakers. While a little more expensive than...
8pc. Low-Profile Brass-plated Box Corners
C. B. Gitty
$6.99
This is a set of 8 low-profile brass-plated box corners with matching screws (3 screws per corner). These are good for smaller boxes or for times when you want a smaller, less obtrusive box corner...
8pc. Low-Profile Nickel-Plated Box Corners
C. B. Gitty
$7.29
This is a set of 8 low-profile nickel-plated box corners with matching screws (3 screws per corner). These are good for smaller boxes or for times when you want a smaller, less obtrusive box corner...