Other Guitar & Instrument Parts

This is a set of 4 sealed-gear tuners/machine heads for Bass Guitars, diddley bows and other instruments that use larger strings. Available in either Chrome or Gold, these tuners come with matching machine screw-in bushings and mounting screws (1 per...

This is a chrome bridge plate with an integrated single-coil pickup set at an angle, such as is often seen on Fender Telecaster(tm) guitars. This bridge plate is intended for 6-string guitars, and included 5 mounting screws and an adjustment allen wrench...

This is a pair of cool sound hole covers cut and engraved with a distinctive skull design, perfect for use on cigar box guitars, dulcimers, amplifiers, other homemade instruments and more! The outside width of of these covers is 2" (50.8mm), and the...

These small screened grommets have an outer flange diameter of 15mm (0.59"), and are perfect for use as cigar box guitar inserts as well as other decorative woodworking uses. The outside diameter of the "shaft" portion of these grommets (the part that...

This is a matched set of Black Stratocaster(tm)-style humbuckers (double-coil magnetic pickups), with mounting machine screws and springs. These humbuckers are meant to be mounted one up towards the neck and one down towards the bridge of an electric...

This premium JESCAR JUMBO stainless steel fret wire is both beautiful and extremely durable, a perfect finishing touch for your special build or re-fretting job! Stainless Steel is just about the hardest type of fretwire you can get, and people who use...

IMPORTANT NOTE: Many of newer stock for these fretboards have a noticeable bow that may look worse than it is. Our testing has shown that they straighten out to normal during clamping, so it should not present issue.This is a pre-fretted rosewood Soprano...

This is a pair of cool sound hole covers with the Cigar Box Nation logo cut and engraved into the surface, perfect for use on cigar box guitars, dulcimers, amplifiers, other homemade instruments and more! The outside diameter of these covers is 2.5" (63...

Ben and Farley have teamed up to bring you a beautiful neck ready for use on your next Cigar Box Guitar, made from the finest raw materials right here at C. B. Gitty headquarters! The dimensions of this neck are 1 1/2" wide (3 1/2" at the headstock) x...

This is a single black "rail style" humbucker pickup, with ferrite magnets and rated at 9.3KOhms of impedance. This is the style of pickup featured in Shane Speal's GuitarWorld.com article on his homemade lap steel guitar. Pop one of these in your...

If you dare to shove a pair of these on your volume and tone pots, then all bets are off! We assume no liability for unexpected mojo, hoodoo or joo joo. We have heard reports that these knobs may impart supernatural boogie capabilities. ...

These are pairs of stylish plated jack plates, for use on Cigar Box Guitars and other homemade instruments.  The jack plates measure 1 5/16 inches on each side and are 3/32-inch thick. they are designed to fit a jack with a standard 3/8-inch shaft,...