Other Guitar & Instrument Parts

These poplar guitar necks are hand-made in the C. B. Gitty workshops in the state of New Hampshire, USA, and we work hard to make sure they are a high-quality product! We use these same necks on our Pure and Simple Kit. They were designed for the...

These 27mm piezo elements are pre-wired with leads to save you having to solder wires on yourself. At just over one inch in diameter, these are a great size for installing in cigar box guitars, foot stompers and other home-made instruments. They can...

These classy little humbucker assemblies are very affordable and boast a rich, warm tone. They come pre-mounted in their pickup rings so all you have to do is cut a hole, drop them in and wire them up!To wire these treat the black wire as your positive...

This is a pack of two general-usage capacitors, rated at from 0.010 microfarads to 0.068 microfarads. These capacitors are great for incorporating into guitar tone circuits, amplifier circuits and more! Please note that we do not include instructions or...

Perhaps the most important aspects in headstock construction, is getting the proper break angle for the strings to get to the nut. One of the easiest ways to do this is with a string retainer bar like this one. These bars are 1.65 inches / 42mm in...

These tuners are an affordable option for Cigar Box Guitar builders on a budget.A 4pc. set of  Open Gear guitar tuners intended for 4-string Cigar Box Guitars, set up for "2 Right/2 Left" configuration on the headstock. Note that the "left" and...

This premium Jescar 18% nickel-silver fret wire is both beautiful and durable, a perfect finishing touch for your special build or re-fretting job! With its medium crown width and low crown height, this is a perfect fret wire for a wide range of smaller...

These are hardwood blanks that can be used as nuts or saddles, perfect for cigar box guitars and other homemade instruments. Here are the dimensions: Length: 2" (50.8mm) Height: 3/8" (0.375 inches or 9.53mm) Thickness: 1/8"  (0.125 inches or 3...

This is a pre-wired harness for selecting between two pickups on an electric guitar. It includes a volume and tone pot with knurled chrome knobs, a 0.047uf capacitor soldered to the tone pot, and a 3-way selector switch. All of the components are mounted...

This is a pack of 12 narrow-diameter string ferrules, great for use on guitars, cigar box guitars and more. Choose from Chrome, Gold and Black finishes. Please refer to the photo with the ruler for an idea of the size of these. The string hole is big...

Great for new instrument fret-work and repair work on mandolins, banjos, dulcimers, cigar box guitars and more! This fret wire is similar to Stewart-MacDonald's Narrow/Low #764, with a nice low crown height perfect for smaller instruments. This...

This is a pair of cool natural (unfinished) wooden sound hole covers with a distinctive Canadian "Maple Leaf" design, perfect for use on cigar box guitars, dulcimers, amplifiers, other homemade instruments and more! The outside diameter of these covers...