C. B. Gitty

This is a pack of 10 individual 20-inch (50.8cm) lengths of shielded wire, perfect for use in cigar box guitar electronics. This is a "2-conductor" wire, with a single insulated wire for the...

Four Different Slides in one ultra low-priced combo...  Each slide arrives in its own seperate burlap Mojo Bag and all packaged in a beautiful cigar box with the Cigar Box Nation logo...

Add a little slice of history to your next cigar box guitar build! This set of F-hole sound hole covers is another in our line of "Classic Coinage" parts for cigar box guitars, all of which have...

Add a little slice of history to your next cigar box guitar build! This is another in our line of "Classic Coinage" parts for cigar box guitars, all of which have real, vintage U. S. coins set into...

Add a little slice of history to your next cigar box guitar build! This is another in our line of "Classic Coinage" parts for cigar box guitars, all of which have real, vintage U. S. coins set into...

Add a little slice of history to your next cigar box guitar build! This is another in our line of "Classic Coinage" parts for cigar box guitars, all of which have real, vintage U. S. coins set into...

 The All-In-One Fretting Starter Kit:  Everything you need to set up your own fretting station in your shop! We've had many customers ask us for an all-in-one setup for fretting...

Bring a bit of American history to your next build with these beautiful Made-in-the-USA hardwood bridges that feature classic silver U. S. coins! These bridges are cut from 1/8" thick genuine...

This is a laser-cut biscuit bridge designed specifically for use on the Charles Atchison 5.5-inch "Lightning" resonator cones that we sell. These are the acoustic version of the biscuit bridge...

These pickups could be straight out of an inventor's barn in the 1940's. If the cigar box guitar was originally meant to be electrified, these would have been the pickups to do it. Consider them...

Finally, a low-cost, professional solution to achieving nice, straight fret slots! This miter box kit was designed by Ben "C. B. Gitty" Baker specifically to make it easy to cut nice, straight slots...

This is a high-quality dovetail-style saw, perfect for cutting fret slots for standard fret wires that fit in a .023" slot. The blade has a .020" kerf and is 8" long with a steel reinforced ridge...