Guitar & Instrument Parts

This is a single black "rail style" humbucker pickup, with ferrite magnets and rated at 9.3KOhms of impedance. This is the style of pickup featured in Shane Speal's GuitarWorld.com article on his homemade lap steel guitar. Pop one of these in your...

This is a 25-piece bulk pack of 1/4" standard mono phone jacks. These jacks have a shorter shaft than the Neutrik-brand jacks we sell, but they are a good bit cheaper and are great for CBGs, amps and other homemade instruments. The shafts on these jacks...

This is a beautiful and distinctive gold-plated Gibson-style 3-way switch, used for selecting between pickups on a guitar. This switch has four solder lugs and is easy to wire. See the photos for an idea of the size. Potentiometers and...

This is a set of two chrome-plated guitar neck mounting cover plates, with matching chrome screws. These consist of a black plastic backing which the chromed metal plate seats into, to help protect the guitar's finish. See the photo with the ruler for an...

  LET'S BRING WHAMMY BARS TO CIGAR BOX GUITARS! Classic 1960's Teisco-style vibrato tailpiece with extra long trem arm.  This is the vibrato design that was Japan's answer to the Bigsby back in the 1960's.  It's got the sweet, wavy...

This is a set of 4 Chrome-plated sealed-gear tuners/machine heads for Bass Guitars, diddley bows and other instruments that use larger strings. These tuners come with machine screw-in bushings and mounting screws (1 per tuner). These fit into a 1/2" or...

This is a set of two gold-plated press-fit knobs for knurled-shaft 6mm potentiometers, with a distinctive ruby (red plastic) inset indicator. These knobs make a great, inexpensive finishing touch for your special build, and provide a nice "premium"...

If you dare to shove a pair of these on your volume and tone pots, then all bets are off! We assume no liability for unexpected mojo, hoodoo or joo joo. We have heard reports that these knobs may impart supernatural boogie capabilities.  (This...

Now it's even easier to drop one of our famous GittyBucker surface-mount pickups into your next build, because we've done all the wiring for you! Thes pre-wired harnesses are by far the easiest magnetic pickup to install out there.  No routing...

This premium JESCAR stainless steel fret wire is both beautiful and extremely durable, a perfect finishing touch for your special build or re-fretting job! Stainless Steel is just about the hardest type of fretwire you can get, and people who use it say...

This is a decorative black tailpiece, designed for use on a mandolin, but also perfect for a cigar box guitar! As shown in the photo above, beneath the removable faceplate cover are pegs meant for loop-end mandolin strings. But a CBG builder can...

This is a set of two black plastic cover plates, for use in covering wiring cavities and other access holes in electric guitars. They also work great for covering access holes in cigar box guitars! So if, after she's all together and the box is sealed,...