Guitar & Instrument Parts

This is a 12-pack of premium "Made in the USA" Switchcraft mono jacks! These are Switchcraft's L11 variety and have a nice long 3/8" bushing, to help get through thicker panels. These are MONO jacks with two contacts, hot and ground - perfect for use on...

This is a 3-pack of chrome-plated ovoid-shaped jack plates. These plates have a curved profile meant to fit the side of a standard acoustic guitar, but they can be easily flattened between two pieces of wood in a vice or carefully with a hammer. The...

This is a set of 12 shiny brass screened grommets, with an outer flange diameter of 15mm. The outside diameter of the "shaft" portion of these grommets (the part that would go into a drilled hole) is 8.255mm. The screen gives these a nice distinctive...

This is a pack of 10 shorter rod piezos originally intended for use with 4-string ukuleles, but they are also GREAT for cigar box guitars! These rod piezos have 4 separate piezo wafers, instead of the 6 that are found on standard guitar rod piezos, so...

This is a full-size (4/4) horsehair violin bow, with an ebony frog and round profile. It is a solid bow that will serve well for homemade cigar box fiddles and students of conventional violin. Like all violin bows, the tension is adjustable.

This set of strings is selected specifically for tuning a 4-string instrument (such as a cigar box guitar) to G D A E tuning - the same tuning commonly used on mandolins, octave mandolins, Irish tenor banjos and bouzoukis, tenor guitars and related...

Individual bridges like these can be a boon when building Cigar Box Basses, diddley bows and more! Having the ability to split up and do a combination of 1-4 strings, really takes some of the limitations (and expense) out of using a dedicated...

This is a set of two gold-finish metal humbucker rings with matching screws (4 per corner), perfect for use on your special build. These are meant for full-size humbucker pickups and not mini-size. The outside dimensions of these rings is 3.5" x 1.75"...

This is a set of 3 gold-plated string retainers for guitar, cigar box guitar and more. These are used any time you want to pull the string height down before they cross the nut, to help with break angle and get better string tension. These are especially...

We have engineered these individual tailpieces to offer unprecedented amount of control over the number of strings on your next instrument build. Designed and manufactured by C. B. Gitty in the USA, these are perfect for cigar box guitars, diddley bows...

A unique set sound hole pieces, one coin slot and the other, a picture frame.  Each is cut from 1/8-inch solid mahogany panels. In his book "Making Poor Man's Guitars", Shane Speal shows using these two together on a cigar box guitar to create...

This is a nice set of one hundred (100) 1/4-inch inside diameter tuner bushings, great for use on guitars, banjos, cigar box guitars, dulcimers and any other stringed instrument that uses standard post-style tuners. These can be used for new instrument...