Other Guitar & Instrument Parts

This simple piezo pickup harness is an inexpensive way to add a pickup to an acoustic guitar or other instrument with no need for tools or permanent alteration. We have branded this as the "Red Dot" due to its shape and color, and also in memory of the...

These 20mm diameter piezoelectric disks have 100mm (roughly 4-inch) pre-wired with leads to save you having to solder the leads on yourself. 20mm is a perfect size for installing in cigar box guitars, foot stompers and other home-made instruments. They...

These poplar guitar necks are hand-made in the C. B. Gitty workshops in the state of New Hampshire, USA, and we work hard to make sure they are a high-quality product! We use the same style neck on our Pure and Simple Kit. They were designed for the...

This is package of 3 matched pairs (6 pieces total) of laser-cut hardwood F-hole cutouts, perfect for use as decorative embellishments on cigar box guitars and other instruments. Each one has two mounting holes, and you can place them over or near round...

This premium JESCAR "SUPER JUMBO" stainless steel fret wire is both beautiful and extremely durable, a perfect finishing touch for your special build or re-fretting job! Stainless Steel is just about the hardest type of fretwire you can get, and people...

This is a set of two handcrafted hardwood cigar box guitar bridges, designed by C. B. Gitty specifically for use on "stick on box" cigar box guitars. We call this model the "Flying Bridge" because it goes up an over a standard 3/4" x 1 1/2" cigar box...

This premium Jescar 18% nickel-silver fret wire is both beautiful and durable, a perfect finishing touch for your special build or re-fretting job! With its super-wide crown width and extra-high crown height, this is some of the biggest fret wire...

This is a pre-wired PAIR of four-pole single-coil enclosed pickups, originally intended for bass guitars, but also perfect for Cigar Box Guitars! This pickup pair is pre-wired with leads in series, and has two leads coming off of the set...

Marking your slide cigar box guitar neck with fret locations has never been easier. Just peel off the backing, snug the front edge up against your nut, and push it down onto the neck. Voila, you've got 25-inch scale fret markings on your neck/fretboard...

This is a stereo chrome-plated end pin/strap button jack perfect for use in guitars, cigar box guitars, and many other instrument and audio projects. This jack is intended to be mounted through the base of an electric guitar where the strap button would...

These poplar Canjo necks are hand-made in the C. B. Gitty workshops in the state of New Hampshire, USA, and we work hard to make sure they are a high-quality product! We use these same necks on our own various canjos as well as in our Complete Canjo Kit...

These are 20mm (0.787") disk piezos, to which we have soldered a ~12-inch shielded cable lead. These longer leads prevent you from having to extend/replace the shorter leads that come on the standard 20mm piezos we sell, which can be a big timesaver...