Other Guitar & Instrument Parts

These 20mm unwired piezo disks are a perfect size for installing in cigar box guitars, foot stompers and other home-made instruments. They can also be used for custom pickup arrangements in more traditional stringed and percussion instruments (drum...

These are black plastic potentiometer knobs, in the classic "top hat" design with a white line indicator. These knobs include a brass set screw and are intended for use on shafts that have a flattened area for best results. You may need to file a...

This is a stainless steel pet dish, very much the same as could be bought (at a higher cost) in many pet supply stores. They have a much better use than for providing water to pets, however: they are of a perfect size and temperament for use as resonator...

These is a set of six premium classic-style tuner bushings, made from sturdy plated metal instead of the usual cheap plastic. These are press-fit style, and made to fit over a standard 6mm (.235") tuner shaft. They fit well intoe a 5/16-inch drilled...

Get ready for some HARD ROCKING with these knobs that go from 0 to 11, in honor of the cult film Spinal Tap! Available in four colors, these plastic press-fit "top hat"-style knobs are designed to fit on standard 6mm knurled pot shafts...

These are 2-piece sets of classical-style (3-on-a-plate) guitar tuners in 3 left/3 right configuration. These were designed to be used in the classical-guitar style where a slot is cut in the headstock and the tuner shaft inserted from the...

This is a set of 4 ukulele tuners with a chrome finish. These are meant for mounting through the headstock from back to front (with the tuner buttons on the back of the headstock), as opposed to the "right angle" style of guitar tuners. These are...

Get the classic B-Bender sound on guitars that have top-loading Hard Tail bridges.  No drilling required.  Easy installation.  Each unit allows players to pull a note one full step up, just like the pedals of a steel guitar. These are...

Here is a classy, inexpensive little pickup for your cigar box guitar or other special build, featuring a "dual-blade" design. Best of all, it's a humbucking dual-coil pickup fit into a single-coil-sized body! These are hot pickups that spec out at...

These vintage-style "soap bar" single-coil pickups are great for both new and repair work on electric guitars, and also work great for cigar box guitars! They are made to look and sound like the vintage "P90" pickup style that has been popular for...

Boost those bluesy mid-range tones.  Clean-up muddy sounding pickups. Crank up the treble for leads.  The Tone Distiller gives your pickups five different personalities. This unique active tone circuit opens up many possibilities by...

These 1.5mm-diameter rods are used for installing fret position markers on the sides of stringed instrument necks - see the listing photos for an example. They are available in white or black. We sell these as a pack of six (6) 4-inch lengths, for 24...